Transom and mullion awnings allow fast and cost-effective installation: guide rails are screwed onto pre-mounted M8 stud bolts, and the box is then attached and secured.
Transom and mullion awnings allow fast and cost-effective installation: guide rails are screwed onto pre-mounted M8 stud bolts, and the box is then attached and secured. End closures for the guide rail cover panel are included.
A minimum clearance of 30 mm above the box is required for installation and removal, and sufficient space behind the box must be available for the plug-in connector edge profile.
To accommodate thermal expansion, the boxes are mounted on floating bearings and are not rigidly connected to the guide rails. Slight movement of the box is normal and does not affect operation.
WAREMA fixing material is supplied as standard and must be used exclusively. Dowel pins are provided on site. M8 stud bolts must protrude 20–30 mm, and the spacer nut tightening torque must not exceed 2 Nm.
Sun Shading